Homemade penis enlargement device

Orthopedic devices for penis enlargement have been used by men for over a decade and their results have been proven to be positive. The most widely used device is called an expander, which translates from English as expander or filler. This fully reflects its purpose. It features simple design and assembly, allowing men to use both purchased (factory) and homemade extenders. It's easy to do. The main thing is to have the necessary materials and basic knowledge about the mechanics of privacy devices.

Types and functions of extenders

The device works on the principle of cavernous proliferation. This occurs under conditions of regular tension in the tissue due to the periodic unfolding of the axis in directions of increasing length. The growth of new tissue does not stop; cells divide under the continued influence of traction.According to user and manufacturer reviews, the average growth rate is 2-5 cm in length over a period of 6 to 10 months. You shouldn't expect immediate results. Patience and regular use of the extender is required. Violation of this recommendation will result in failure to achieve the desired results.

There are several types of extenders based on their connection methods. When planning to assemble a home version, you need to know the differences between them.

vacuum extender

A special vacuum chamber is used for circumference measurements. It covers the circumference of the glans penis by approximately 3-7 cm. It is considered the most reliable and safe. Since there is no risk of compression, the risk of injury is effectively reduced to zero.penis enlargement extender

Rings and strap extenders

The mechanism of fastening is almost the same, but the shape of the fastening is different. In the first case, use a ring, in the second, a strap. This difference makes these species significantly different.The strap is lined with gauze so there is minimal compression. In contrast, rings compress the head strongly and disrupt the blood supply to the reproductive organs, but are still the most common option.

How to make an extender at home?

You can make any of the three types of equipment listed. The hardest thing to make is the vacuum chamber because you have to make a chamber. Otherwise, the process won't make any significant difference.

drawing

Make a device schematic yourself. To make drawings, it is enough to study the designs of any well-known manufacturer. They make sketches based on photos, paintings, videos. The length of the jambs is chosen according to the desired result. It varies from 20 to 25 cm.

Materials and tools needed

A home-made extender is assembled from the same parts as in the factory. The specific materials depend on the type of structure being assembled:

• Stop rings, straps and loops are in direct contact with the skin and should not cause allergic reactions. This puts certain requirements on materials. The ring can be made from thick cardboard, hypoallergenic plastic/plastic without sharp corners. Its inner diameter should be 2-3 mm larger than the cross-sectional width of the penis. It is best to use a sterile bandage before use and change it every time.
• The slats (side bars) should be chosen so that they can be fixed for the long term to the required length. These can be molds, rods, chrome plated spokes.
• The vacuum chamber and bulb must be sealed. If this condition is not met, then such a homemade product will not work.

The difference between these devices lies in the fastening elements. If you decide to make various products with a camera, you should not give priority to plastic bottles, as some sources write, but buy special jars. These are available in pharmacies. This ensures the creation of an internal vacuum.Homemade expander schematic diagram

Step-by-step assembly instructions

Manufacturing a strap or ring device involves performing the following sequence of work:

1. A piece 11 cm in diameter cut from plywood or other material not exceeding 10 mm thick, with a hole in the interior having a circumference of at least 5. 5 cm. Other dimensions are determined by its cross-section. penis.
2. The length of the poles is 20-30 cm, they are completely screwed into the plywood, leaving a little at the top. The entrance is filled with glue.
3. They nailed a "lamb" to each sheep.
4. Cut strips from thin metal sheets and punch holes in them.
5. Insert a clip made from hose or tape into the hole to use as a wide medical tourniquet.
6. Check the reliability of the fixation.

The assembly of the vacuum variety differs only in that a jar with pears is attached to the end. Not everyone has such a device at home, but it is sold for free in city pharmacies. The radius range is 13 to 25 mm. Choose based on the size of your reproductive organs. The sealing of the clamp is ensured by a rubber sleeve. Its length must be at least 6 cm. It can be made from elastic surgical gloves.

The air will be drawn out through the bulb or a connector with a hose. You can use a tonometer element. Unscrew the shutoff valve from it and insert it from the other end. This allows you to change the operating principle. The pears will begin to pump out air instead of out. As you can see, you will need to do more patching than you would with a band-and-loop device.To help you understand the principles of assembling an extender at home with your own hands, a video will help, which clearly shows how the elements are connected and what materials they are made of.Penis enlargement extender - strapped under the knees

How and when to use?

An indicator of the use of this device is the small size of the device (10-12 cm). This length is not a "reference" length. Men decide for themselves whether they are satisfied with their reproductive organs or if they want more. To increase penis size, you need to wear a homemade or factory-made device for at least 4-6 hours a day. The design allows you to hide the extender under clothing. People around you won't notice anything.Instructions for use of stretcher:

1. Place the circle on your slightly erect penis. The ring should fit snugly against the pubic bone.
2. The foreskin is retracted and the camera, ring, or strap is secured to the glans. It is necessary to ensure that the blood flow is not disturbed (no excessive pressure, no change in skin color).
3. Adjust the length of the rod. There should be no feeling of pain. Gradually increase the parameters to allow the organ to adapt to the level of tension, that is, to train the penis.

If possible, massage your penis every hour. This allows him to quickly adapt to the load. After the prescribed time, the device is removed and the pulp is kneaded using a special privacy cream. Equipment is thoroughly disinfected every time and stored in clean packaging.

Advantages and Disadvantages of Homemade Construction

The advantages of home stretchers include the following parameters:

• Opportunity to try out a stretcher without purchasing the equipment;
• Relatively cheap;
• Get a design that perfectly matches the parameters of your penis.

In fact, there are very few advantages. There are more disadvantages. These include the inconvenience of the product, since it is quite difficult to independently assemble a model that can be ideally twisted, put on and taken off, without pressing anywhere and without slipping.

Which supplement is better – factory or homemade?

To answer this question, it is enough to compare two types of models:

1. Homemade products are much heavier than factory models. This results in lengthy adjustments of the rods each time to prevent them from compressing the glans penis. Another point is that the production of vacuum models is quite difficult. By the way, it's usually not as effective as homemade ones with rings and straps.
2. The cost that is considered an advantage is a relative advantage. Now there are Chinese models, priced at 1-3 thousand rubles. This is no more expensive than a homemade extender. No one will sell half a meter of hairpins or 20cm of textolite. You will have to buy more unused materials. This makes it profitable to assemble the device with your own hands only if you already have everything you need.
3. The simplified design of self-assembling equipment is not an advantage, but a disadvantage because it is inconvenient to use. You have to spend a lot of time putting them on and taking them off, and the self-massage is less effective considering the regular recommendations.

One conclusion can be drawn - the factory equipment is better. To try this penis enlargement method, all you need to do is buy a cheap model

What are the possible risks of using homemade equipment?

Experts and experts do not recommend assembling an extender yourself without the proper skills. If the device proves to be "cumbersome", presses, or causes discomfort, wearing it is strongly not recommended. This can lead to unpleasant consequences.homemade extenderA well-assembled piece of equipment is no less efficient than factory equipment. It will just be aesthetically unappealing. Otherwise there wouldn't be much of a difference, but there are subtle differences here too. Many users wrote that long-term use can cause hematoma formation, compaction, and irritation in the dermis.This may be caused by low quality materials. Finding medical grade silicone in a pharmacy is nearly impossible. If an item is sold, its performance is less than ideal, and over time, negative consequences begin to appear.